Fireye SMDK-1004 - Servicemans Display Kit Micro M

The SMDK-1004 is a portable palmtop display kit that facilitates the installation of the MicroM, Flame Safeguard Control. It can also be used later to obtain operational and historical information. The SMDK-1004 consists of an ED510 alphanumeric display; a MED2, remote daughter board and a 4 foot cable.

The ED510 Display Module is a backlit, 2 line by 16 character LCD display with keypad to provide both current operation and historical information of the MicroM. The ED510 contains a keypad consisting of three push keys, SCRL, RESET and MODE.

The ED510 displays current burner status, first out annunciation in the event of a lockout condition, historical burner information, detailed lockout information of the last six (6) lockout conditions and programmer configuration information. Through the display the ability to program the unit address for communications, as well as resetting the stored information (cycles, hours, and lockouts) to zero is provided.

At any time the MicroM is powered, the SCRL key is used to scroll through and display the total number burner hours, burner cycles, burner lockouts and system hours on the bottom line of the ED510 display. The top line will continue to show the current run mode of the control (e.g. PURGE, AUTO, etc.) Following the historical information, the SCRL key will display three (3) sub-menus providing the following information and/or functions:

• Lockout History (with burner cycle and burner hour time stamp)
• Program Setup (to display programmer type, purge timing, switch configuration, etc.)
• System Information (values of average pilot and main flame signal, and reset burner history)